B&R X20IF10E3-1

Category: I/O systems > X20 System > X20 interface module communication

PROFINET IO device Integrated switch for efficient cabling The interface module is equipped with a PROFINET IO device interface.

This allows the B&R system (I/O modules, POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly and easily transfer data in both directions.

The interface module can be operated in the X20 controllers or in the expandable X20BC1083 POWERLINK bus controller.

The interface is equipped with 2 RJ45 connections. Both connections result in an integrated switch.

This makes it easy to implement daisy chain cabling.

Technical Specifications

Short description

• Communication module = PROFINET IO device (slave)

General information

• Diagnostics
• Module status = Yes, using LED status indicator and software
• Network status = Yes, using LED status indicator and software
• Data transfer = Yes, using LED status indicator
• Certifications
• CE = Yes
• UKCA = Yes
• CRA (Cyber Resilience Act) = In preparation
• ATEX = Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
• UL = cULus E115267 Industrial control equipment
• HazLoc = cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
• DNV = Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
• CCS = Yes
• LR = ENV1
• KR = Yes
• ABS = Yes
• BV = EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
• KC = Yes
• B&R ID code = 0xA71E
• Status indicators = Module status, network status, data transfer
• Power consumption = 2 W
• Additional power dissipation caused by actuators (resistive) [W] = -

Interfaces

• PROFINET attributes
• Conformance class = C
• Performance class = RT (switch supports IRT)
• Netload class = III
• Transfer
• Physical layer = 100BASE-TX
• Half-duplex = Yes
• Full-duplex = Yes
• Autonegotiation = Yes
• Auto-MDI/MDIX = Yes
• Fieldbus = PROFINET IO device (slave)
• Variant = 2x shielded RJ45 (switch)
• Line length = Max. 100 m between 2 stations (segment length)
• Transfer rate = 100 Mbit/s
• Controller = netX100

Electrical properties

• Electrical isolation = PLC isolated from PROFINET IO (IF1 and IF2)

Operating conditions

• Mounting orientation
• Horizontal = Yes
• Vertical = Yes
• Installation elevation above sea level
• 0 to 2000 m = No limitation
• >2000 m = Reduction of ambient temperature by 0.5°C per 100 m
• Degree of protection per EN 60529 = IP20

Ambient conditions

• Temperature
• Operation
• Horizontal mounting orientation = -25 to 60°C
• Vertical mounting orientation = -25 to 50°C
• Derating = -
• Storage = -40 to 85°C
• Transport = -40 to 85°C
• Relative humidity
• Operation = 5 to 95%, non-condensing
• Storage = 5 to 95%, non-condensing
• Transport = 5 to 95%, non-condensing

Mechanical properties

• Slot = In the X20 PLC and expandable bus controller X20BC1083

Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Normal delivery takes 2–6 business days subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.

Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.