Category: Motion control > ACOPOS > Plug-in modules
POWERLINK interface for installation in ACOPOS servo drives Integrated 2-port hub for easy wiring For communication and configuration of ACOPOS servo drives in complex and time-critical applications Node number configurable using switch ACOPOS plug-in module, POWERLINK V2 interface.
Technical Specifications
General information
- Support
- Dynamic node allocation (DNA) = No
- Certifications
- CE = Yes
- UKCA = Yes
- CRA (Cyber Resilience Act) = Non-compliant
- UL = cULus E225616 Power conversion equipment
- KC = Yes
- Module type = ACOPOS plug-in module
- B&R ID code = 0xA5C1
- Slot = Slot 1
- Power consumption = Max. 3 W
Interfaces
- POWERLINK
- Watchdog functionality
- Hardware = Yes (via ACOPOS servo drive)
- Software = Yes (via ACOPOS servo drive)
- Quantity = 1
- Module-side connection = 2x RJ45 port
- Status indicators = Status LED + 2x Link LED
- Transfer rate = 100 Mbit/s
- 2-port hub = Yes
- Possible station operating modes = Synchronous to the POWERLINK cycle
- Electrical isolation = Yes
- Cabling topology = Star or tree with level 2 hubs
- Maximum number of hub levels = 10
- Line length = Max. 100 m between two stations (segment length)
- Network-capable = Yes
Ambient conditions
- Temperature
- Operation
- Nominal = 5 to 40°C
- Maximum = 55°C
- Storage = -25 to 55°C
- Transport = -25 to 70°C
- Relative humidity
- Operation = 5 to 85%
- Storage = 5 to 95%
- Transport = Max. 95% at 40°C